JT128

Name: JT128
SKU: JT128

Model / article: JT128

JT128 is listed by Hesai Technology in Robot LiDAR. Published model data includes Communication interface: Standard 100Base-TX; Ingress protection rating: IP6K7. See the specification table for operating conditions and source evidence.

JT128

Request supplier information More from this supplier

Product overview

Manufacturer / supplier: Hesai Technology
Series: JT128
Component type: Robot LiDAR
Source: Open published source

Published pricing

No verified public price indexed for this model. Contact PartMeld for a supplier inquiry.

Published specifications

Values are shown as published. Conditions, rating basis and source evidence apply to each value.

Latest source observation: 2026-10-16. Observation dates record evidence collection, not supplier re-verification.

Specifications and source evidence for JT128
Specification	Published value	Conditions and source
Communication interfaceModel-level statement	Standard 100Base-TX	rule validated Operating conditions applicability 1 Introduction 1.1 Applicability This manual applies to the following versions: Software 15.AF.B0.00.02.Y or later Firmware of Sensor 2.b.0692 or later Firmware of Controller 1.b.0028 or later clock source GNSS/PTP (1588v2 over UDP/IP, 1588v2 over L2, 802.1AS, 802.1AS Automotive) configuration 95-degree vertical FOV configuration described in manual; verify firmware applicability model JT128 source revision J01-en-261010 Source evidence Data transmission Standard 100Base-TX PDF page 21 / Data transmission Source observed: 2026-10-16View source
Ingress protection ratingModel-level statement	IP6K7	rule validated Operating conditions applicability 1 Introduction 1.1 Applicability This manual applies to the following versions: Software 15.AF.B0.00.02.Y or later Firmware of Sensor 2.b.0692 or later Firmware of Controller 1.b.0028 or later configuration 95-degree vertical FOV configuration described in manual; verify firmware applicability model JT128 source revision J01-en-261010 Source evidence Ingress protection IP6K7 PDF page 20 / Ingress protection Source observed: 2026-10-16View source
Lidar channel countModel-level statement	128 Channels	rule validated Operating conditions source scope Current model-specific website tab; published typical values under unspecified test conditions Source evidence 128 Channels #tab-jt128 / Channels Source observed: 2026-10-15View source
Lidar point rateModel-level statement	1,152,000 pts/s [Single Return] POINT RATE	rule validated Operating conditions return mode Single Return source scope Current model-specific website tab; published typical values under unspecified test conditions Source evidence 1,152,000 pts/s [Single Return] POINT RATE #tab-jt128 / POINT RATE Source observed: 2026-10-15View source
Lidar powerModel-level statement	8.4 WRating: typical	rule validated Operating conditions ambient temperature 25°C applicability 1 Introduction 1.1 Applicability This manual applies to the following versions: Software 15.AF.B0.00.02.Y or later Firmware of Sensor 2.b.0692 or later Firmware of Controller 1.b.0028 or later configuration 95-degree vertical FOV configuration described in manual; verify firmware applicability excludes accessories such as connection box external supply minimum 2.6 A, 30 W frame rate 10 Hz model JT128 rating typical source revision J01-en-261010 Source evidence Power consumption ④ 8.4 W PDF page 21 / Power consumption Source observed: 2026-10-16View source
Lidar range 10 reflectivityModel-level statement	40 m @10% Reflectivity [60 m Max] Ranging Capability	rule validated Operating conditions maximum range not equivalent 60 m Max has no target condition; not indexed as 10% range reflectivity 10% source scope Current model-specific website tab; published typical values under unspecified test conditions Source evidence 40 m @10% Reflectivity [60 m Max] Ranging Capability #tab-jt128 / Ranging Capability Source observed: 2026-10-15View source
Lidar return modeModel-level statement	Return mode Single return: First/Strongest/Last Dual return: Last and Strongest (default) / Last and First / First and Strongest	rule validated Operating conditions model JT128 model scope Only configuration/revision described in linked document source document https://www.hesaitech.com/wp-content/uploads/2026/10/JT128_User_Manual_J01-en-261010.pdf Source evidence Return mode Single return: First/Strongest/Last Dual return: Last and Strongest (default) / Last and First / First and Strongest PDF page 20 / Return mode Source observed: 2026-10-16View source
Lidar wavelengthModel-level statement	905 nm	rule validated Operating conditions applicability 1 Introduction 1.1 Applicability This manual applies to the following versions: Software 15.AF.B0.00.02.Y or later Firmware of Sensor 2.b.0692 or later Firmware of Controller 1.b.0028 or later configuration 95-degree vertical FOV configuration described in manual; verify firmware applicability model JT128 source revision J01-en-261010 Source evidence Wavelength 905 nm PDF page 20 / Wavelength Source observed: 2026-10-16View source
Operating temperature rangeModel-level statement	-20°C to 65°C	rule validated Operating conditions applicability 1 Introduction 1.1 Applicability This manual applies to the following versions: Software 15.AF.B0.00.02.Y or later Firmware of Sensor 2.b.0692 or later Firmware of Controller 1.b.0028 or later configuration 95-degree vertical FOV configuration described in manual; verify firmware applicability model JT128 source revision J01-en-261010 temperature basis ambient air; surface and internal temperatures can exceed ambient Source evidence Operating temperature ⑤ -20°C to 65°C PDF page 21 / Operating temperature Source observed: 2026-10-16View source
Supply voltage rangeModel-level statement	DC 9 to 32 V	rule validated Operating conditions applicability 1 Introduction 1.1 Applicability This manual applies to the following versions: Software 15.AF.B0.00.02.Y or later Firmware of Sensor 2.b.0692 or later Firmware of Controller 1.b.0028 or later configuration 95-degree vertical FOV configuration described in manual; verify firmware applicability measurement location lidar connector model JT128 source revision J01-en-261010 Source evidence Rated voltage range ③ DC 9 to 32 V PDF page 21 / Rated voltage range Source observed: 2026-10-16View source

Technical documents and resources

Confirm the exact configuration, price, availability and operating conditions with the supplier before ordering.

Report a specification error