PartMeld

AGS Automation Greifsysteme Schwope GmbH

GZA-S-20-16-34

Model / article: 1-60-20-31-00-GZA

GZA-S-20-16-34 is listed by AGS Automation Greifsysteme Schwope GmbH in End effectors & grippers. Consult the published specifications and source documents below for available technical details.

60.0 Grippers. GZA-S-20-16 Special Gripper with Jaws Surface Crossed fluted. Listed in the manufacturer-supplied PRECIGRIP catalogue dated 30 October 2026. Prices, availability and CAD are available on request from AGS; no downloadable CAD or stock status is inferred.

Request supplier informationMore from this supplier
Catalogue range illustration (not a variant-specific photograph)
Catalogue range illustration (not a variant-specific photograph)

Product overview

Manufacturer / supplier
AGS Automation Greifsysteme Schwope GmbH
Series
GZA-S-20-16 Special Gripper with Jaws Surface Crossed fluted
Component type
End effectors & grippers
Source
Open published source

Published pricing

No verified public price indexed for this model. Contact PartMeld for a supplier inquiry.

Published specifications

Values are shown as published. Conditions, rating basis and source evidence apply to each value.

Latest source observation: . Observation dates record evidence collection, not supplier re-verification.

Specifications and source evidence for GZA-S-20-16-34
SpecificationPublished valueConditions and source
Catalogue legendModel-level statementLegend: E = Air connection M = gripping force (at 6 bar) Gripping force 10N = 1kg

rule validated

Operating conditions
basis
Printed catalogue value; drawing letters and family-specific conditions retained. Dimensions in mm unless otherwise stated. No force-to-payload conversion.
catalogue page
145
table
1
Source evidence
Legend: E = Air connection M = gripping force (at 6 bar) Gripping force 10N = 1kg

PRECIGRIP catalogue 30 Oct 2026 / PDF page 145 / table on page 145, table 1 / 1-60-20-31-00-GZA / Drawing and table legend

Source observed: 2026-11-02View source
Catalogue notesModel-level statementGZA-S-20-16 Special Gripper with Jaws Surface Crossed fluted ADVANTAGES V1 - Closing movement via 1 piston V2 - Gripper jaws with special coating V3 - Clamping round and prismatic V4 - Marking grooves every 10 mm on shaft for easy adjustment V5 - two gripper variants available: Jaws with small and large opening angle REMARK Operating principle: Single-acting Operating pressure: 6 bar filtered and dried air The illustration above shows our GZA-S- 20-16-24 gripper.

rule validated

Operating conditions
basis
Printed catalogue value; drawing letters and family-specific conditions retained. Dimensions in mm unless otherwise stated. No force-to-payload conversion.
catalogue page
145
table
1
Source evidence
GZA-S-20-16 Special Gripper with Jaws Surface Crossed fluted ADVANTAGES V1 - Closing movement via 1 piston V2 - Gripper jaws with special coating V3 - Clamping round and prismatic V4 - Marking grooves every 10 mm on shaft for easy adjustment V5 - two gripper variants available: Jaws with small and large opening angle REMARK Operating principle: Single-acting Operating pressure: 6 bar filtered and dried air The illustration above shows our GZA-S- 20-16-24 gripper.

PRECIGRIP catalogue 30 Oct 2026 / PDF page 145 / table on page 145, table 1 / 1-60-20-31-00-GZA / Catalogue description and operating notes

Source observed: 2026-11-02View source
Catalogue specificationsModel-level statementA: 20; B: 25; C: 73; D: 34; E: G1/8; M: 65N; N: P22

rule validated

Operating conditions
basis
Printed catalogue value; drawing letters and family-specific conditions retained. Dimensions in mm unless otherwise stated. No force-to-payload conversion.
catalogue page
145
table
1
Source evidence
A: 20; B: 25; C: 73; D: 34; E: G1/8; M: 65N; N: P22

PRECIGRIP catalogue 30 Oct 2026 / PDF page 145 / table on page 145, table 1 / 1-60-20-31-00-GZA / Catalogue specifications

Source observed: 2026-11-02View source

Technical documents and resources

Confirm the exact configuration, price, availability and operating conditions with the supplier before ordering.

Report a specification error