TS200E

Name: TS200E
SKU: TS200E

Model / article: TS200E

TS200E is listed by SPINEA in Cycloidal reducers. Published model data includes Rated output torque: 890 (rated); Product mass: 17,2. See the specification table for operating conditions and source evidence.

High-precision reduction gear with flange-shaped case and integrated radial/axial bearings; published for robotic and general automation applications.

Request supplier information More from this supplier

E-series representative product illustration; not a configured-model image

Product overview

Manufacturer / supplier: SPINEA
Series: TwinSpin E series
Component type: Cycloidal reducers
Source: Open published source

Published pricing

No verified public price indexed for this model. Contact PartMeld for a supplier inquiry.

Published specifications

Values are shown as published. Conditions, rating basis and source evidence apply to each value.

Latest source observation: 2026-10-14. Observation dates record evidence collection, not supplier re-verification.

Specifications and source evidence for TS200E
Specification	Published value	Conditions and source
Acceleration torqueModel-level statement	2225Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation load case Acceleration and braking; no duration stated nominal life L10 =6000 [Hrs] published ratio options ["63","125","169"] temperature Nominal operating temperature; numerical value not stated in HTML Source evidence TS200E \| Acceleration and braking torque: 2225 Nm HTML table[3], tr[17], source cell[4]; expanded column 4; TS200E Source observed: 2026-10-14View source
Allowable momentModel-level statement	3300Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation load case Fa=0; for Fa≠0 consult manufacturer tilting-moment chapter nominal life L10 =6000 [Hrs] output speed rpm 15 published ratio options ["63","125","169"] temperature Nominal operating temperature; numerical value not stated in HTML Source evidence TS200E \| Max. tilting moment 2)3): 3300 Nm HTML table[4], tr[17], source cell[6]; expanded column 6; TS200E Source observed: 2026-10-14View source
Available ratiosModel-level statement	63, 125, 169	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] temperature Nominal operating temperature; numerical value not stated in HTML Source evidence TS200E \| Ratio: 63, 125, 169 HTML table[2], tr[8], source cell[2]; expanded column 3; TS200E Source observed: 2026-10-14View source
Permitted axial loadModel-level statement	31,7Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation load case Mc=0; for Mc≠0 consult manufacturer tilting-moment chapter nominal life L10 =6000 [Hrs] output speed rpm 15 published ratio options ["63","125","169"] temperature Nominal operating temperature; numerical value not stated in HTML Source evidence TS200E \| Max. axial force 2)4): 31,7 kN HTML table[4], tr[17], source cell[8]; expanded column 8; TS200E Source observed: 2026-10-14View source
Backdrive torqueModel-level statement	200Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] ratio 125 temperature Nominal operating temperature; numerical value not stated in HTML temperature condition Below 20°C produces higher no-load starting/back-driving torque Source evidence TS200E \| Max. back driving torque 9): 200 Nm HTML table[3], tr[19], source cell[5]; expanded column 12; TS200E Source observed: 2026-10-14View source
Backdrive torqueModel-level statement	210Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] ratio 169 temperature Nominal operating temperature; numerical value not stated in HTML temperature condition Below 20°C produces higher no-load starting/back-driving torque Source evidence TS200E \| Max. back driving torque 9): 210 Nm HTML table[3], tr[20], source cell[5]; expanded column 12; TS200E Source observed: 2026-10-14View source
Backdrive torqueModel-level statement	90Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] ratio 63 temperature Nominal operating temperature; numerical value not stated in HTML temperature condition Below 20°C produces higher no-load starting/back-driving torque Source evidence TS200E \| Max. back driving torque 9): 90 Nm HTML table[3], tr[18], source cell[5]; expanded column 12; TS200E Source observed: 2026-10-14View source
Emergency stop torqueModel-level statement	4450Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation load case Permissible torque at emergency stop; not a safety certification nominal life L10 =6000 [Hrs] published ratio options ["63","125","169"] temperature Nominal operating temperature; numerical value not stated in HTML Source evidence TS200E \| Permissible torque at emergency stop: 4450 Nm HTML table[3], tr[17], source cell[5]; expanded column 5; TS200E Source observed: 2026-10-14View source
Input inertiaModel-level statement	2,6	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation informative true nominal life L10 =6000 [Hrs] published ratio options ["63","125","169"] temperature Nominal operating temperature; numerical value not stated in HTML version dependency Exact value depends on specific version Source evidence TS200E \| Input inertia 8): 2,6 10^-4 kg m² HTML table[4], tr[17], source cell[9]; expanded column 9; TS200E Source observed: 2026-10-14View source
Lost motionModel-level statement	<1,0Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] published ratio options ["63","125","169"] temperature Nominal operating temperature; numerical value not stated in HTML upper bound exclusive true Source evidence TS200E \| Max. lost motion: <1,0 arcmin HTML table[4], tr[17], source cell[3]; expanded column 3; TS200E Source observed: 2026-10-14View source
Product massModel-level statement	17,2	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation informative true nominal life L10 =6000 [Hrs] published ratio options ["63","125","169"] temperature Nominal operating temperature; numerical value not stated in HTML version dependency Exact value depends on specific version Source evidence TS200E \| Weight 8): 17,2 kg HTML table[4], tr[17], source cell[10]; expanded column 10; TS200E Source observed: 2026-10-14View source
Maximum input speedModel-level statement	4000Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] ratio 125 speed condition Depends on duty cycle; consult manufacturer for maximum speed; PDF calls it instantaneous speed peak within cycle supporting source url https://www.spinea.com/svc/stream/media/downloads/Catalogue%20lists/E temperature Nominal operating temperature; numerical value not stated in HTML Source evidence TS200E \| Max. allowable input speed10): 4000 rpm HTML table[3], tr[19], source cell[3]; expanded column 8; TS200E Source observed: 2026-10-14View source
Maximum input speedModel-level statement	3500Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] ratio 63 speed condition Depends on duty cycle; consult manufacturer for maximum speed; PDF calls it instantaneous speed peak within cycle supporting source url https://www.spinea.com/svc/stream/media/downloads/Catalogue%20lists/E temperature Nominal operating temperature; numerical value not stated in HTML Source evidence TS200E \| Max. allowable input speed10): 3500 rpm HTML table[3], tr[18], source cell[3]; expanded column 8; TS200E Source observed: 2026-10-14View source
Maximum input speedModel-level statement	4500Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] ratio 169 speed condition Depends on duty cycle; consult manufacturer for maximum speed; PDF calls it instantaneous speed peak within cycle supporting source url https://www.spinea.com/svc/stream/media/downloads/Catalogue%20lists/E temperature Nominal operating temperature; numerical value not stated in HTML Source evidence TS200E \| Max. allowable input speed10): 4500 rpm HTML table[3], tr[20], source cell[3]; expanded column 8; TS200E Source observed: 2026-10-14View source
Moment stiffnessModel-level statement	1300	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] published ratio options ["63","125","169"] statistic Mean statistical value temperature Nominal operating temperature; numerical value not stated in HTML version dependency Parameter depends on reduction gear version Source evidence TS200E \| Tilting stiffness 1)6): 1300 Nm/arcmin HTML table[3], tr[17], source cell[9]; expanded column 9; TS200E Source observed: 2026-10-14View source
Permitted radial loadModel-level statement	21,1Rating: rated	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] output speed rpm 15 published ratio options ["63","125","169"] temperature Nominal operating temperature; numerical value not stated in HTML Source evidence TS200E \| Rated radial force 2): 21,1 kN HTML table[4], tr[17], source cell[7]; expanded column 7; TS200E Source observed: 2026-10-14View source
Rated output torqueModel-level statement	890Rating: rated	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] published ratio options ["63","125","169"] rated input speed rpm 2000 temperature Nominal operating temperature; numerical value not stated in HTML Source evidence TS200E \| Rated output torque: 890 Nm HTML table[3], tr[17], source cell[3]; expanded column 3; TS200E Source observed: 2026-10-14View source
Starting torqueModel-level statement	1,70Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] ratio 125 temperature Nominal operating temperature; numerical value not stated in HTML temperature condition Below 20°C produces higher no-load starting/back-driving torque Source evidence TS200E \| Max. no-load starting torque 9): 1,70 Nm HTML table[3], tr[19], source cell[4]; expanded column 11; TS200E Source observed: 2026-10-14View source
Starting torqueModel-level statement	0,90Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] ratio 169 temperature Nominal operating temperature; numerical value not stated in HTML temperature condition Below 20°C produces higher no-load starting/back-driving torque Source evidence TS200E \| Max. no-load starting torque 9): 0,90 Nm HTML table[3], tr[20], source cell[4]; expanded column 11; TS200E Source observed: 2026-10-14View source
Starting torqueModel-level statement	1,90Rating: maximum	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] ratio 63 temperature Nominal operating temperature; numerical value not stated in HTML temperature condition Below 20°C produces higher no-load starting/back-driving torque Source evidence TS200E \| Max. no-load starting torque 9): 1,90 Nm HTML table[3], tr[18], source cell[4]; expanded column 11; TS200E Source observed: 2026-10-14View source
Torsional stiffnessModel-level statement	200	rule validated Operating conditions configuration scope Named E-series size model; ratio, shaft and flange selected separately; no complete ordering SKU inferred dependencies Version, ratio and lost motion duty cycle Preferred intermittent cycles S3–S8; inverted-variable output speed; continuous S1 requires manufacturer consultation nominal life L10 =6000 [Hrs] published ratio options ["63","125","169"] statistic Mean statistical value temperature Nominal operating temperature; numerical value not stated in HTML version dependency Parameter depends on reduction gear version Source evidence TS200E \| Torsional stiffness 1)7): 200 Nm/arcmin HTML table[3], tr[17], source cell[10]; expanded column 10; TS200E Source observed: 2026-10-14View source

Technical documents and resources

Confirm the exact configuration, price, availability and operating conditions with the supplier before ordering.

Report a specification error