PartMeld

AGS Automation Greifsysteme Schwope GmbH

GZA-20-16-S-C

Model / article: 1-60-15-17-00-GZA

GZA-20-16-S-C is listed by AGS Automation Greifsysteme Schwope GmbH in End effectors & grippers. Published model data includes Product mass: 0.102Kg. See the specification table for operating conditions and source evidence.

60.0 Grippers. GZA-S-C-S Gripper with Saw Tooth and Sensor. Listed in the manufacturer-supplied PRECIGRIP catalogue dated 30 October 2026. Prices, availability and CAD are available on request from AGS; no downloadable CAD or stock status is inferred.

Request supplier informationMore from this supplier
Catalogue range illustration (not a variant-specific photograph)
Catalogue range illustration (not a variant-specific photograph)

Product overview

Manufacturer / supplier
AGS Automation Greifsysteme Schwope GmbH
Series
GZA-S-C-S Gripper with Saw Tooth and Sensor
Component type
End effectors & grippers
Source
Open published source

Published pricing

No verified public price indexed for this model. Contact PartMeld for a supplier inquiry.

Published specifications

Values are shown as published. Conditions, rating basis and source evidence apply to each value.

Latest source observation: . Observation dates record evidence collection, not supplier re-verification.

Specifications and source evidence for GZA-20-16-S-C
SpecificationPublished valueConditions and source
Catalogue legendModel-level statementLegend: D = Air connection through shaft F = lateral air connection L = Cylinder sensor (plug or cable) M = cable length N = gripping force (at 6 bar) Gripping force 10N = 1kg X = suitable for sprue thickness

rule validated

Operating conditions
basis
Printed catalogue value; drawing letters and family-specific conditions retained. Dimensions in mm unless otherwise stated. No force-to-payload conversion.
catalogue page
142
table
1
Source evidence
Legend: D = Air connection through shaft F = lateral air connection L = Cylinder sensor (plug or cable) M = cable length N = gripping force (at 6 bar) Gripping force 10N = 1kg X = suitable for sprue thickness

PRECIGRIP catalogue 30 Oct 2026 / PDF page 142 / table on page 142, table 1 / 1-60-15-17-00-GZA / Drawing and table legend

Source observed: 2026-11-02View source
Catalogue notesModel-level statementGZA-S-C-S Gripper with Saw Tooth and Sensor ADVANTAGES V1 - Closing movement via 2 pistons V2 - Gripper jaws with special coating V3 - compact attachment/ optimised force transmission -short levers V4 - Gripper jaws with cross serration V5 - Clamping diameter (A) can be used over the entire length V6 - Standard sensor (sprue available) with C-slot Cylinder sensor ZYS V7 - Gun interrogation REMARK Operating principle: Single-acting Operating pressure: Use 6 bar filtered and dried air The illustration above shows our gripper GZA-14-16-S-C-S. Scope of delivery: GZA ..... S incl. cylinder sensor ZYS-3,7-300-S with plug Cable KAD-M8-3 ... with plug for ZYS- 3,7-300-S direct order at the same time!

rule validated

Operating conditions
basis
Printed catalogue value; drawing letters and family-specific conditions retained. Dimensions in mm unless otherwise stated. No force-to-payload conversion.
catalogue page
142
table
1
Source evidence
GZA-S-C-S Gripper with Saw Tooth and Sensor ADVANTAGES V1 - Closing movement via 2 pistons V2 - Gripper jaws with special coating V3 - compact attachment/ optimised force transmission -short levers V4 - Gripper jaws with cross serration V5 - Clamping diameter (A) can be used over the entire length V6 - Standard sensor (sprue available) with C-slot Cylinder sensor ZYS V7 - Gun interrogation REMARK Operating principle: Single-acting Operating pressure: Use 6 bar filtered and dried air The illustration above shows our gripper GZA-14-16-S-C-S. Scope of delivery: GZA ..... S incl. cylinder sensor Z

PRECIGRIP catalogue 30 Oct 2026 / PDF page 142 / table on page 142, table 1 / 1-60-15-17-00-GZA / Catalogue description and operating notes

Source observed: 2026-11-02View source
Catalogue specificationsModel-level statementA: 20; B: 20; C: 75; D: M5; E: 22,5; F: M5; K: P13; L: ZYS-3,7-300-S; M: 300; N: 55N; WEIGHT: 0.102Kg; X: 2,5-8mm

rule validated

Operating conditions
basis
Printed catalogue value; drawing letters and family-specific conditions retained. Dimensions in mm unless otherwise stated. No force-to-payload conversion.
catalogue page
142
table
1
Source evidence
A: 20; B: 20; C: 75; D: M5; E: 22,5; F: M5; K: P13; L: ZYS-3,7-300-S; M: 300; N: 55N; WEIGHT: 0.102Kg; X: 2,5-8mm

PRECIGRIP catalogue 30 Oct 2026 / PDF page 142 / table on page 142, table 1 / 1-60-15-17-00-GZA / Catalogue specifications

Source observed: 2026-11-02View source
Product massModel-level statement0.102Kg

rule validated

Operating conditions
basis
Printed catalogue value; drawing letters and family-specific conditions retained. Dimensions in mm unless otherwise stated. No force-to-payload conversion.
catalogue page
142
table
1
Source evidence
0.102Kg

PRECIGRIP catalogue 30 Oct 2026 / PDF page 142 / table on page 142, table 1 / 1-60-15-17-00-GZA / Catalogue weight

Source observed: 2026-11-02View source

Technical documents and resources

Confirm the exact configuration, price, availability and operating conditions with the supplier before ordering.

Report a specification error