CAP-NET-C

Name: CAP-NET-C
SKU: CAP-NET-C

Model / article: CAP-NET-C

CAP-NET-C is listed by Ingenia Motion Control (Novanta) in Embedded servo drives. Published model data includes Product mass: 17.5 g; Maximum supply voltage: 60 VDC (continuous) (maximum). See the specification table for operating conditions and source evidence.

Capitan NET

Request supplier information More from this supplier

manufacturer ordering table, shared image cell for listed variants

Product overview

Manufacturer / supplier: Ingenia Motion Control (Novanta)
Series: Capitan NET
Component type: Embedded servo drives
Source: Open published source

Published pricing

No verified public price indexed for this model. Contact PartMeld for a supplier inquiry.

Published specifications

Values are shown as published. Conditions, rating basis and source evidence apply to each value.

Latest source observation: 2026-09-26. Observation dates record evidence collection, not supplier re-verification.

Specifications and source evidence for CAP-NET-C
Specification	Published value	Conditions and source
Continuous output currentModel-level statement	10 A Typically, 10 A can be obtained working at 48 V, 50 kHz with an appropriate cooling to keep case temperature under 85 ºC. On higher temperatures an automatic current derating will be applied to protect the system. See Thermal and Power Specifications below. For disambiguation on current definitions please see Disambiguation on current values and naming for Ingenia Drives.Rating: continuous	rule validated Operating conditions basis phase current; not re-labelled RMS bus voltage v 48 case temperature limit c 85 cooling appropriate cooling required; automatic derating at higher temperature pwm frequency khz 50 Source evidence CAP-NET-C \| Maximum continuous phase current: 10 A Typically, 10 A can be obtained working at 48 V, 50 kHz with an appropriate cooling to keep case temperature under 85 ºC. On higher temperatures an automatic current derating will be applied to protect the system. See Thermal and Power Specifications below. For disambiguation on current definitions please see Disambiguation on current values and naming for Ingenia Drives. CAP-NET-C / Maximum continuous phase current Source observed: 2026-09-26View source
Drive dimensionsModel-level statement	34.5 mm x 26 mm	rule validated Operating conditions axes horizontal dimensions only; height separately documented Source evidence CAP-NET-C \| Horizontal dimensions: 34.5 mm x 26 mm CAP-NET-C / Horizontal dimensions Source observed: 2026-09-26View source
Supported feedbackModel-level statement	Digital Halls Quadrature / Incremental encoder: Up to 2 at the same time. Absolute Encoder: up to 2 at the same time, combining any of the following: Dual BiSS-C (up to 2 in daisy chain topology or simultaneously) SSI EnDat 2.2 All feedback inputs are single-ended, 3.3 V logic levels. *Not all the existing absolute encoders are supported. Contact Ingenia for further information.Rating: maximum	rule validated Source evidence CAP-NET-C \| Feedbacks: Digital Halls Quadrature / Incremental encoder: Up to 2 at the same time. Absolute Encoder: up to 2 at the same time, combining any of the following: Dual BiSS-C (up to 2 in daisy chain topology or simultaneously) SSI EnDat 2.2 All feedback inputs are single-ended, 3.3 V logic levels. *Not all the existing absolute encoders are supported. Contact Ingenia for further information. CAP-NET-C / Feedbacks Source observed: 2026-09-26View source
Control networkModel-level statement	CiA-301, CiA-303, CiA-305, CiA-306 and CiA-402 (4.0) compliant. 125 kbps to 1 Mbps (default). Non-isolated. Termination resistor not included. Note: Ethernet port 1 can be used to configure the drive.	rule validated Source evidence CAP-NET-C \| CANopen / Ethernet (CAP-NET-C): CiA-301, CiA-303, CiA-305, CiA-306 and CiA-402 (4.0) compliant. 125 kbps to 1 Mbps (default). Non-isolated. Termination resistor not included. Note: Ethernet port 1 can be used to configure the drive. CAP-NET-C / CANopen / Ethernet (CAP-NET-C) Source observed: 2026-09-26View source
Drive operating temperatureModel-level statement	-20 ºC to +85 ºC	rule validated Operating conditions measurement ambient; current derating and case-temperature limits also apply Source evidence CAP-NET-C \| Ambient temperature (Operating): -20 ºC to +85 ºC CAP-NET-C / Ambient temperature (Operating) Source observed: 2026-09-26View source
Peak output currentModel-level statement	20 A @ 1 sec Notice that peak current could be limited by an automatic current derating algorithm. In order to get 20 A, case temperature should be kept below 60 ºC.Rating: peak	rule validated Operating conditions basis phase current case temperature below c 60 duration s 1 limitation automatic current derating may limit peak Source evidence CAP-NET-C \| Maximum peak phase current: 20 A @ 1 sec Notice that peak current could be limited by an automatic current derating algorithm. In order to get 20 A, case temperature should be kept below 60 ºC. CAP-NET-C / Maximum peak phase current Source observed: 2026-09-26View source
Maximum supply voltageModel-level statement	60 VDC (continuous)Rating: maximum	rule validated Operating conditions rating continuous DC bus limit Source evidence CAP-NET-C \| Maximum DC bus supply voltage: 60 VDC (continuous) CAP-NET-C / Maximum DC bus supply voltage Source observed: 2026-09-26View source
Minimum supply voltageModel-level statement	5 VDCRating: minimum	rule validated Operating conditions supply DC bus Source evidence CAP-NET-C \| Minimum DC bus supply voltage: 5 VDC CAP-NET-C / Minimum DC bus supply voltage Source observed: 2026-09-26View source
Product massModel-level statement	17.5 g	rule validated Source evidence CAP-NET-C \| Weight: 17.5 g CAP-NET-C / Weight Source observed: 2026-09-26View source

Technical documents and resources

Manufacturer product page

Confirm the exact configuration, price, availability and operating conditions with the supplier before ordering.

Report a specification error