PartMeld

AGS Automation Greifsysteme Schwope GmbH

GER-GWS-R-MV-M6

Model / article: 1-10-42-99-00-GER

GER-GWS-R-MV-M6 is listed by AGS Automation Greifsysteme Schwope GmbH in End effectors & grippers. Consult the published specifications and source documents below for available technical details.

10.0 Gripper / EOAT Quick Change. GER-GGP-R-MV Threaded insert for GGP-R-MV. Listed in the manufacturer-supplied PRECIGRIP catalogue dated 30 October 2026. Prices, availability and CAD are available on request from AGS; no downloadable CAD or stock status is inferred.

Request supplier informationMore from this supplier
Catalogue range illustration (not a variant-specific photograph)
Catalogue range illustration (not a variant-specific photograph)

Product overview

Manufacturer / supplier
AGS Automation Greifsysteme Schwope GmbH
Series
GER-GGP-R-MV Threaded insert for GGP-R-MV
Component type
End effectors & grippers
Source
Open published source

Published pricing

No verified public price indexed for this model. Contact PartMeld for a supplier inquiry.

Published specifications

Values are shown as published. Conditions, rating basis and source evidence apply to each value.

Latest source observation: . Observation dates record evidence collection, not supplier re-verification.

Specifications and source evidence for GER-GWS-R-MV-M6
SpecificationPublished valueConditions and source
Catalogue notesModel-level statementGER-GGP-R-MV Threaded insert for GGP-R-MV ADVANTAGES V1 – This threaded insert can be used to compensate for differences in interface dimensions. This allows the GGP-R-MV base plate (with countersinks for M8 screws) and our ADP-ISO-P adapter plates (with countersinks for M6 screws) to be bolted together.

rule validated

Operating conditions
basis
Printed catalogue value; drawing letters and family-specific conditions retained. Dimensions in mm unless otherwise stated. No force-to-payload conversion.
catalogue page
15
table
1
Source evidence
GER-GGP-R-MV Threaded insert for GGP-R-MV ADVANTAGES V1 – This threaded insert can be used to compensate for differences in interface dimensions. This allows the GGP-R-MV base plate (with countersinks for M8 screws) and our ADP-ISO-P adapter plates (with countersinks for M6 screws) to be bolted together.

PRECIGRIP catalogue 30 Oct 2026 / PDF page 15 / table on page 15, table 1 / 1-10-42-99-00-GER / Catalogue description and operating notes

Source observed: 2026-11-02View source
Catalogue specificationsModel-level statementA: M6

rule validated

Operating conditions
basis
Printed catalogue value; drawing letters and family-specific conditions retained. Dimensions in mm unless otherwise stated. No force-to-payload conversion.
catalogue page
15
table
1
Source evidence
A: M6

PRECIGRIP catalogue 30 Oct 2026 / PDF page 15 / table on page 15, table 1 / 1-10-42-99-00-GER / Catalogue specifications

Source observed: 2026-11-02View source

Technical documents and resources

Confirm the exact configuration, price, availability and operating conditions with the supplier before ordering.

Report a specification error