AGS Automation Greifsysteme Schwope GmbH
TCU-P-100-3-OV
Model / article: 1-61-50-22-00-TCU
TCU-P-100-3-OV is listed by AGS Automation Greifsysteme Schwope GmbH in Parallel & adaptive grippers. Consult the published specifications and source documents below for available technical details.
63.0 Parallel Grippers. TCU-P Toleranz Compensation Unit. Listed in the manufacturer-supplied PRECIGRIP catalogue dated 30 October 2026. Prices, availability and CAD are available on request from AGS; no downloadable CAD or stock status is inferred.
Product overview
- Manufacturer / supplier
- AGS Automation Greifsysteme Schwope GmbH
- Series
- TCU-P Toleranz Compensation Unit
- Component type
- Parallel & adaptive grippers
- Source
- Open published source
Published pricing
No verified public price indexed for this model. Contact PartMeld for a supplier inquiry.
Published specifications
Values are shown as published. Conditions, rating basis and source evidence apply to each value.
Latest source observation: . Observation dates record evidence collection, not supplier re-verification.
| Specification | Published value | Conditions and source |
|---|---|---|
| Catalogue legendModel-level statement | Legend: D = maximum force in N E = max. torque in Nm F = max. torque in Nm G = max. torque in Nm H = Deflection F I = Deflection E J = Deflection G | rule validated Operating conditions
Source evidenceLegend: D = maximum force in N E = max. torque in Nm F = max. torque in Nm G = max. torque in Nm H = Deflection F I = Deflection E J = Deflection G PRECIGRIP catalogue 30 Oct 2026 / PDF page 163 / table on page 163, table 1 / 1-61-50-22-00-TCU / Drawing and table legend |
| Catalogue notesModel-level statement | TCU-P Toleranz Compensation Unit ADVANTAGES V1 - Compensation of workpiece-related tolerances and positional accuracy reduces the risk of jamming, necessary assembly forces are reduced and wear on the workpiece and handling device is minimised V2 - The compensation of the TCU-P is based on elastomers, which compensate in all directions and thus also correct angular errors and produce rotation compensation V3 –Optionally, a pneumatic locking device is available, with which the compensation unit can be rigidly locked. This prevents the tool or gripper from vibrating when the robot arm is moved REMARK We offer the tolerance compensation unit variant without pneumatic locking Other designs with pneumatic locking and monitoring of the locking can be selected Operating pressure: 6bar use filtered and dried air The specified forces and torques are maximum values in the unlocked state and may occur simultaneously. In the locked state, only the loads caused by the dead weight and accelerations are permissible. | rule validated Operating conditions
Source evidenceTCU-P Toleranz Compensation Unit ADVANTAGES V1 - Compensation of workpiece-related tolerances and positional accuracy reduces the risk of jamming, necessary assembly forces are reduced and wear on the workpiece and handling device is minimised V2 - The compensation of the TCU-P is based on elastomers, which compensate in all directions and thus also correct angular errors and produce rotation compensation V3 –Optionally, a pneumatic locking device is available, with which the compensation unit can be rigidly locked. This prevents the tool or gripper from vibrating when the robot arm is moved R PRECIGRIP catalogue 30 Oct 2026 / PDF page 163 / table on page 163, table 1 / 1-61-50-22-00-TCU / Catalogue description and operating notes |
| Catalogue specificationsModel-level statement | A: 50; B: 26; C: 81; D: 2000N; E: 25Nm; F: 60Nm; G: 60Nm; H: 1°; I: 1,5°; J: 1,2° | rule validated Operating conditions
Source evidenceA: 50; B: 26; C: 81; D: 2000N; E: 25Nm; F: 60Nm; G: 60Nm; H: 1°; I: 1,5°; J: 1,2° PRECIGRIP catalogue 30 Oct 2026 / PDF page 163 / table on page 163, table 1 / 1-61-50-22-00-TCU / Catalogue specifications |
Technical documents and resources
Confirm the exact configuration, price, availability and operating conditions with the supplier before ordering.