Series 2300 / 1 N·m

Name: Series 2300 / 1 N·m
SKU: Series 2300 / 1 N·m

Model / article: Series 2300 / 1 N·m

Series 2300 / 1 N·m is listed by NCTE in Torque sensors. Published model data includes Operating temperature: -30 to +85 °C; Ingress protection: IP50 per EN 60529. See the specification table for operating conditions and source evidence.

Contactless magnetostrictive rotating torque sensors documented by NCTE as suitable for robotics, assembly systems and mobile robots. Records include only published torque and shaft configurations; signal and angle choices remain attributed order options.

Request supplier information More from this supplier

Product overview

Manufacturer / supplier: NCTE
Series: NCTE Series 2300 contactless torque sensors
Component type: Torque sensors
Source: Open published source

Published pricing

No verified public price indexed for this model. Contact PartMeld for a supplier inquiry.

Published specifications

Values are shown as published. Conditions, rating basis and source evidence apply to each value.

Latest source observation: 2026-09-19. Observation dates record evidence collection, not supplier re-verification.

Specifications and source evidence for Series 2300 / 1 N·m
Specification	Published value	Conditions and source
Sensor accuracy classModel-level statement	0.5 %Rating: maximum	rule validated Operating conditions definition linearity deviation and rotational signal uniformity are each less than or equal to the accuracy class; not DIN 51309 or EA-10/14 classification Source evidence Series 2300 / 1 N·m \| Accuracy class: 0.5 % NCTE Series 2300 instruction manual and data sheet V24/01, February 2024, p.11 / Series 2300 / 1 N·m / Accuracy class Source observed: 2026-09-19View source
Sensor architectureModel-level statement	Contactless magnetostrictive rotating torque sensor; 8 mm round shaft	rule validated Source evidence Series 2300 / 1 N·m \| Architecture: Contactless magnetostrictive rotating torque sensor; 8 mm round shaft NCTE Series 2300 instruction manual and data sheet V24/01, February 2024, p.10 / Series 2300 / 1 N·m / Architecture Source observed: 2026-09-19View source
Sensor connectorModel-level statement	Binder Series 712-M9, 8-pin; 5 m cable included	rule validated Source evidence Series 2300 / 1 N·m \| Electrical connection: Binder Series 712-M9, 8-pin; 5 m cable included NCTE Series 2300 instruction manual and data sheet V24/01, February 2024, p.13 / Series 2300 / 1 N·m / Electrical connection Source observed: 2026-09-19View source
Sensor cutoff frequencyModel-level statement	1000 Hz	rule validated Operating conditions filter Bessel characteristic Source evidence Series 2300 / 1 N·m \| Cutoff frequency (-3 dB): 1000 Hz NCTE Series 2300 instruction manual and data sheet V24/01, February 2024, p.11 / Series 2300 / 1 N·m / Cutoff frequency (-3 dB) Source observed: 2026-09-19View source
Sensor interfaceModel-level statement	0–10 V, 4–20 mA, optional USB or CAN bus	rule validated Operating conditions not expanded output and optional angle choices are not generated as inferred SKUs Source evidence Series 2300 / 1 N·m \| Output options: 0–10 V, 4–20 mA, optional USB or CAN bus NCTE Series 2300 instruction manual and data sheet V24/01, February 2024, p.14 / Series 2300 / 1 N·m / Output options Source observed: 2026-09-19View source
Sensor limit torque bidirectionalModel-level statement	1.3 N·mRating: maximum	rule validated Operating conditions configuration identity series, published nominal torque and explicitly available shaft form; signal and angle choices remain order options direction bidirectional overload warning Operate only within nominal torque; overload causing measurement offset requires NCTE recalibration shaft interface 8 mm round shaft Source evidence Series 2300 / 1 N·m \| Bidirectional limit torque: 1.3 N·m NCTE Series 2300 instruction manual and data sheet V24/01, February 2024, p.10 / Series 2300 / 1 N·m / Bidirectional limit torque Source observed: 2026-09-19View source
Sensor limit torque unidirectionalModel-level statement	1.3 N·mRating: maximum	rule validated Operating conditions configuration identity series, published nominal torque and explicitly available shaft form; signal and angle choices remain order options direction bidirectional overload warning Operate only within nominal torque; overload causing measurement offset requires NCTE recalibration shaft interface 8 mm round shaft Source evidence Series 2300 / 1 N·m \| Unidirectional limit torque: 1.3 N·m NCTE Series 2300 instruction manual and data sheet V24/01, February 2024, p.10 / Series 2300 / 1 N·m / Unidirectional limit torque Source observed: 2026-09-19View source
Sensor maximum speedModel-level statement	10000 rpmRating: maximum	rule validated Operating conditions shaft interface 8 mm round shaft Source evidence Series 2300 / 1 N·m \| Maximum rotational speed: 10000 rpm NCTE Series 2300 instruction manual and data sheet V24/01, February 2024, p.10 / Series 2300 / 1 N·m / Maximum rotational speed Source observed: 2026-09-19View source
Operating temperatureModel-level statement	-30 to +85 °C	rule validated Operating conditions reference temperature +15 to +35 °C Source evidence Series 2300 / 1 N·m \| Operating temperature: -30 to +85 °C NCTE Series 2300 instruction manual and data sheet V24/01, February 2024, p.11 / Series 2300 / 1 N·m / Operating temperature Source observed: 2026-09-19View source
Ingress protectionModel-level statement	IP50 per EN 60529	rule validated Operating conditions wiring connected true Source evidence Series 2300 / 1 N·m \| Protection class: IP50 per EN 60529 NCTE Series 2300 instruction manual and data sheet V24/01, February 2024, p.11 / Series 2300 / 1 N·m / Protection class Source observed: 2026-09-19View source
Rated torqueModel-level statement	1 N·mRating: rated	rule validated Operating conditions configuration identity series, published nominal torque and explicitly available shaft form; signal and angle choices remain order options direction bidirectional overload warning Operate only within nominal torque; overload causing measurement offset requires NCTE recalibration shaft interface 8 mm round shaft Source evidence Series 2300 / 1 N·m \| Nominal torque: 1 N·m NCTE Series 2300 instruction manual and data sheet V24/01, February 2024, p.10 / Series 2300 / 1 N·m / Nominal torque Source observed: 2026-09-19View source

Technical documents and resources

Confirm the exact configuration, price, availability and operating conditions with the supplier before ordering.

Report a specification error